Support

Gioteck support

Lume-N8 Console lightbarFOR PS3™

Setup

Setup

The Lume-N8 Console Lightbar is easy to set up for use. Please follow the instructions below:

PS3 slim console

1. To ensure a clean surface, wipe the rear of your console with a clean anti-static cloth to remove any dust or dirt build-up.

2. Remove the adhesive strip cover paper on the lightbar.

3. Carefully align the lightbar (lightbar power switch on the right) with the top and sides of the console and press firmly for a few seconds to secure in place.

4. Guide the USB cable underneath the console and connect to an available port on the front.

5. Slide the power switch sidewards to select your desired LED light colour.

Lume-N8 lightbar

PS3 console

1. Gently slide down and remove the end cap from lightbar (Figure 1).

2. Connect the lightbar extension piece by pushing it into the open end of the lightbar until it clicks into place (Figure 2 & 3).

Lume-N8 lightbar

3. To ensure a clean surface, wipe the rear of your console with a clean anti-static cloth to remove any dust or dirt build-up.

4. Remove the adhesive strip cover paper on the lightbar.

5. Carefully align the lightbar (lightbar power switch on the right) with the top and sides of the console and press firmly for a few seconds to secure in place.

6. Guide the USB cable underneath the console and connect to an available port on the front.

7. Slide the power switch sidewards to select your desired LED light colour.

Lume-N8 lightbar

Operation

The Lume-N8 Console Lightbar is simple to use and adjust to your preference, simply follow the instructions below to achieve your desired setting.

Colour control

Lume-N8 lightbar

Left - In this position the lightbar will be Blue.

Centre - In this position the lightbar will be Red.

Right - In this position the lightbar will be Off.

Trouble Shooting

My LUME-N8 Console Bar will not light up.

1. Check that the Switch on the lightbar is set to blue or red, and not in the off position
2. Make sure that the USB cable is plugged in to the console, and that the console is also on.

If you still have a problem

Please contact support with any problems/issues you have. Our trained staff have detailed knowledge of our product range and will be happy to solve any problems. (English language support only).

Visit Us On TwitterVisit Us On FacebookVisit Us On Youtube