Firmware updates:

Click on the links below to download firmware update software for Gioteck products.

GC-1 Wireless Controller Sensitivtivy update files

Instructions: Click on the link below to download the GC-1 firmware updater files, then follow the instructions to update you controller.


1. Navigate to the zip file you have just downloaded containing the firmware updater and 3 firmware files and double click on it and choose the location you wish to unzip it to.
2. Locate the Gioteck PS3 Wireless controller ISP V17_Setup firmware update program. on your computer and double click on it to run it. Follow the onscreen instructions.
3. Once the setup program is installed run the firmware updater by going to your windows system folder > Program files > PS3 update and run the program "GamepadUpdate.exe"
4. Select your language and remove the batteries from the GC-1 controller, while holding the Select and Start buttons connect the mini USB end of the USB cable to the controller and the USB end to your PC.
5. All four LEDS on the controller should flash for a few seconds, before briefly becoming solid and then going out. Please note that they may sometimes flash for a while, as this indicates that the Windows drivers are being installed.
6. Once the LEDs have gone out, the sensitivity firmware is ready to be installed.
7. Click "Open File" button witihn the updater program and select the different sensitivity firmware file at the location you unzipped them to;
for High Sensitivity select: GC10621(High sensitivity 70-90)v2
for Medium Sensitivity select: GC10621(Medium sensitivity 73-8D)v3 [Default Setting of GC1 controller]
for Low Sensitivity select: GC10621(low sensitivity 78-89)v1
8. A message will popup to notify you once the update is complete. Please note that all four LEDs on the controller will also become solid.

GC-1 Sensitivtivy update files:

Gioteck GC-1 Firmware update files

VX-1 Wireless Controller (Dongle Free version)

Instructions: Click on the link below to download the VX-1 firmware updater files, then follow the instructions to update you controller.


1. Navigate to the zip file you have just downloaded containing the firmware updater and frimaware file and double click on it and choose the location you wish to unzip it to.
2. Locate the Gioteck PS3 Wireless controller ISP V17_Setup firmware update program. on your computer and double click on it to run it. Follow the onscreen instructions
3. Once the setup program is installed run the firmware updater by going to your windows system folder > Program files > PS3 update and run the program "GamepadUpdate.exe"
4. Select your language and remove the batteries from the VX-1 controller, connect the min usb end of the USB cable to the controller and the USB end to your PC.
5. Press Select + Start simultaneously , the controller dirver will then install.
6. Click the "Open File" button witihn the updater program and the firmware file (VX1PS3-31 V3.57) at the location you unzipped them to;
7. Click "Update" button to download the new firmware to VX1 Controller. A message will popup to notify you once the update is complete.

VX-1 update files:

Gioteck VX-1 Wireless (Dongle free) Firmware update files

HF-2 Controller

Instructions: Click on the link below to download the latest version of the updater, then follow the instructions to update your controller.


1. Navigate to the zip file you have just downloaded containing the firmware updater and double click on it and choose the location you wish to unzip it to.
2. Locate the Gioteck firmware updater on your computer and double click on it to run it.
3. Insert a mini USB cable into your PC.
4. Remove the battery cover and then the batteries from your HF-2 controller.

5. Whilst holding down R3 and SELECT insert the mini USB connector into the mini USB port of your HF2. If done correctly the 4 LEDs will light up solid.

6. Wait for any drivers to install.
7. Follow the onscreen instructions of the updater program (The sensitivity of your HF-2 is set to 'Normal' as default).


HF-2 Updater:

Gioteck HF-2 Controller Firmware Updater - Version 1.0

Visit Us On TwitterVisit Us On FacebookVisit Us On Youtube